2020 Good Quality PET Metallic Heat Transfer Vinyl - PET Metallic Heat Transfer Vinyl – Gaoda

Metallic heat transfer sticker is also called electroplating heat transfer sticker,is a popular sticker recent years .It can be cut by manual but also with plotter cutting machine,it is convenient to make .Usual apply to T-shirtsThis product Gross weight about 5kg per roll, washing test more than 100 times and the materials used in the film are environmentally friendly materials and have passed OEKO-TEX,SGS certification.The lettering film needs to be used according to computer cutter Plotter,press about 20-30pounds,the peeling method is cold peeling,temperature about 150-160°C.Product features are soft,easy cut and weed.
There are dozens of colors to choose from, the conventional ones are sliver, orange, gold yellow, green,red,grey etc. It also can be according to customers requirements. Film special letering texture og product and the computer must be supporting the use of cutting plotter and heat press machine(product without printing)very convenient,but also chromatic transfer,in order to increase the richness and bariability commitment should matter,and is not limited to the color of the fabic.As long as the fabic material of textile products all can transfer,after the trtansfer has excellent washing fastness.The products are widely applied to a monochrome graphics,team uniforms team logo,sports numbers,signs,advertisemens,posters,company logo,etc.The products are mainly applied to cloth, cotton, nylon, fiber.This product si suitable for text and graphics,used on textile fabrics,shoes,leather and bags products,Also suitable for oxford cloth and non-woven.Clothes with a waterproof costing of all can not be printed,mettal products,ceramic,plastic wood can nott be printed.
How to use the film:1.Before using the film ,peel the protective liner to expose the adhesive or cutting part of the film.(these instructions are printed on that said liner)
2.feed the vinyl into your plotter or cutting machine.Material will not require any special settings.
3.Using a vinyl weeding tool or hook,remove the excess vinyl from the printedd sheet,leaving only the part of the design you wish to transfer to the fabic.
4.Place the graphicnoto the target area.Make sure the surface is flat,clean abd free from any residue.has a built-in transfer surface.No transfer paper needed.
5.Using a press or iron,apply medium pressure with an iron set to 305°f/150°C for approximately 25-40 seconds.
6.After the garment has fully cooled slowly remove the transfer paper.If the design lifts,replace the cloth and iron again for another 10-15 seconds.